Toggle Switches - Series 20 Pcb Mounting Type Vertical Operation PCRV
Integral (Series 20) Toggle Switches of the PCB mounting types with vertical operation meet the needs of customers wanting a high quality, high current carrying switch in small volume. Standardisation of design in components used from single to four poles, careful choice of materials and attention to details result in reliable and consistent performance. They are available with popular actuator types and sizes. Design variations in the contacts result in all the required switching functions. Though all the mounting bush options are available, the standard ones are unthreaded type, since the mounting on the PCB is rigid.
|CONTACT RATING :||3 Amps @ 250 V AC ; 5A @ 28 V DC. See Contact selection for others.|
|ELECTRICAL LIFE :||100,000 make-and-break cycles at full load on all models ending in-1(ON-NONE-ON). All other models, 40,000 cycles.|
|CONTACT RESISTANCE :||Below 10 milliohms initial @ 2-6 V DC. 100 mA for both silver and gold plated contacts.|
|INSULATION RESISTANCE :||1000 Megohms min.|
|DIELECTRIC STRENGTH :||1000 VRMS min. @ sea level.|
|OPERATING TEMP :||-30 Degree C to 85 Degree C.|
MATERIALS & FINISHES
|BODY :||Diallyl Phthalate ( DAP )|
|ACTUATOR :||Brass nickel plated|
|HOUSING :||Stainless steel|
|BUSHING :||Brass nickel plated|
|HARDWARE :||Brass nickel plated|
|TERMINAL SEAL :||Epoxy|
|CONTACTS :||See below under contact selection.|
Please Refer the Datasheet for further information.
will be updated shortly..